Filter capacitor |
 |
MATPC filter compensation capacitor model is mainly used in low voltage power grid in tandem with filter reactor, tuned to a resonant frequency point, used to absorb the corresponding frequency harmonic current in the power grid, but also can effectively improve the power factor of system, reducing reactive power loss, improve power quality. A, technical parameters Execution standard: IEC60831-1, GB/T12747.1-2004 A pressure: 1.1 the Un (8 h / 24 h), 1.15 the Un (30 min / 24 h) Flow: 1.3 x In Rated frequency: 50 hz or 60 hz Should the value deviation: plus or minus 5% Test voltage: 2.15 x Un (AC), 2 SEC (terminal - terminal); 3000 v (AC), 10 SEC (terminal - shell) Power consumption: 0.25 W/kvar or less (excluding discharge resistance) The life of life: 130000 h Protection grade: IP20 Temperature level: 25 ℃ / D Cooling method: natural air cooling or forced cooling Relative humidity: 95% or less Hypo height: 4000 m or less Installation method: indoor anywhere Safety performance: dry, pressure-sensitive cut-off, self-healing technology Discharge resistance: standard discharge time in the 60-180 seconds, discharge time can be customized Second, the technical characteristic
In pieces dry technology Mixer CooCop technology In pieces single capacity range from 2 to 150 kvar Pieces placed outside the electrical resistance Mixer protected terminals Pieces each phase is configured with pressure-sensitive circuit protection technology Pieces of SF6 gas filling |
